Skip to main content

Inwood Iron Bridge - Lebanon County, Pennsylvania

Image
By

 


While the number of historic iron truss and metal truss bridges has been dwindling over the years due to several factors, occasionally a bridge will be preserved for its historical value. Such is the case of the Inwood Iron Bridge, which was built in 1899 and located near Lickdale, Pennsylvania. The Inwood Iron Bridge was fabricated by the Pittsburgh Bridge Company and erected by Nelson and Buchanan of Chambersburg, Pennsylvania. It is historically significant as one of the oldest surviving Pennsylvania thru truss highway bridges in Pennsylvania. Early examples of Pennsylvania (Petit) thru-truss highway bridges from before the 20th Century were not common as the design was more often used for railroad bridges. Only a handful of such roadway bridges have been identified around Pennsylvania, making the Inwood Iron Bridge more historically significant.

The 151-foot-long Inwood Iron Bridge crossed Swatara Creek and was located not far from Swatara State Park in Lebanon County, Pennsylvania. Closed to traffic in 2006. After over 100 years of use, time and wear had taken their toll on the bridge, and the bridge had deteriorated to a point where it was no longer structurally sound to carry traffic. As the closing of the Inwood Iron Bridge had left only one method of egress for residents living along the east bank of the Swatara Creek, there had been considerations of rehabilitating the bridge. However, local officials noted the need for emergency vehicles, buses, and other heavy vehicles at this crossing and looked for ways the bridge could be rehabilitated to accommodate heavier vehicles. For the bridge to be able to accommodate heavier load capacities, it was found that many of the truss members needed to be replaced.

It was determined that the historic bridge could not be rehabilitated to meet the unique needs of modern-day traffic without significantly altering the bridge's character. Also, the cost of rehabilitation of the bridge to accommodate heavier loads exceeded the cost of a new structure. Fortunately, the Pennsylvania State Department of Transportation has a program in place that focuses on the reuse of historic metal truss bridges as pedestrian or light vehicular bridges on trails or in parks. Given the Inwood Iron Bridge's historic significance as one of the new remaining Pennsylvania thru-truss highway bridges, a strong case was made for its preservation. The land for a park was found about a quarter mile downstream from the bridge's original location on Iron Bridge Road thanks to a land sale of only $2.00 by a couple of residents. Thus, a small park was created for the bridge and efforts to move the bridge to the new location started in 2019.

In July 2019, the Inwood Iron Bridge was lifted off its original abutments and then disassembled. The individual bridge members were repaired or replaced at another location. After rehabilitation was completed and a fresh coat of paint was given to the bridge, the bridge was then reassembled at its new location at the Inwood Iron Bridge Park. A substructure, parking spaces, a short walking trail, and informational plaques were installed so the bridge park could be opened in 2020.

I visited the Inwood Iron Bridge Park in January 2004 during a trip through this area of Pennsylvania. You can easily walk along the bridge, or even under the bridge. Efforts were made for the bridge to be accessible for all ability levels. I feel that much consideration and care was given to restoring the bridge and honoring its historical significance. You can combine a visit to the Inwood Iron Bridge with another bridge nearby that was relocated due to its historical significance, the Waterville Bridge. This was a great pit stop for the explorer and bridge hunter in me.

Taking a walk down the restored Inwood Iron Bridge.

Checking out some of the unique features of this Pennsylvania thru-truss bridge.

Side profile of the Inwood Iron Bridge.

Taking a look underneath the Inwood Iron Bridge.

Bridge plaque on top of the bridge stating who had built the bridge.

The Inwood Iron Bridge at its former location upstream on the Swatara Creek. This bridge could be viewed from PA 72 when I took this picture in April 2009.



How to Get There:



Sources and Links:
Pennsylvania State Preservation - Bridge Preservation and Education: A Site Visit to the Inwood Iron Bridge
McCormick Taylor - Inwood Iron Truss Bridge Rehabilitation and Relocation
Labels:
Location: Inwood Iron Bridge Park, Swatara Township, PA 17038, USA

Comments

Post a Comment

Popular posts from this blog

Old US Route 60/70 through Hell (Chuckwall Valley Road and Ragsdale Road)

By
Back in 2016 I explored some of the derelict roadways of the Sonoran Desert of Riverside County which were part of US Route 60/70; Chuckwalla Valley Road and Ragsdale Road. US 60 and US 70 were not part of the original run of US Routes in California.  According to USends.com US 60 was extended into California by 1932.  US 60 doesn't appear on the California State Highway Map until the 1934 edition. USends.com on US 60 endpoints 1934 State Highway Map Conversely US 70 was extended into California by 1934, it first appears on the 1936 State Highway Map. USends.com on US 70 endpoints 1936 State Highway Map When US 60 and US 70 were extended into California they both utilized what was Legislative Route Number 64 from the Arizona State Line west to Coachella Valley.  LRN 64 was part of the 1919 Third State Highway Bond Act routes.  The original definition of LRN 64 routed between Mecca in Blythe and wasn't extended to the Arizona State Line until 1931 acc...
3 comments
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

Paper Highways; Interstate H-4 through downtown Honolulu

By
The Hawaiian Island of O'ahu is home to four Interstate Highways; H-1, H-2, H-3 and H-201.  Had history gone slightly differently during the 1960s a fifth Interstate corridor on O'ahu could have been constructed through downtown Honolulu and the neighborhood of Waikiki.  The proposed corridor of Interstate H-4 can be seen above as it was presented by the Hawaii Department of Transportation during October 1968 .   This page is part of the Gribblenation O'ahu Highways page.  All Gribblenation and Roadwaywiz media related to the highway system of O'ahu can be found at the link below: https://www.gribblenation.org/p/gribblenation-oahu-highways-page.html The history of proposed Interstate H-4 The corridor of Interstate H-4 was conceived as largely following what is now Hawaii Route 92 on Nimitz Highway and Ala Moana Boulevard.   Prior to the Statehood the first signed highways within Hawaii Territory came into existence during World War II.    Dur...
Post a Comment
Read more