Skip to main content

Peterborough Lift Lock - Trent-Severn Waterway, Ontario

Image
By


Our overall transportation system is full of engineering marvels. This is especially true for our historic canals. The Peterborough Lift Lock is also known as Lock 21 of the 240-mile-long (386 kilometers) Trent-Severn Waterway, near Peterborough Ontario, Canada, which connects the Georgian Bay at Port Severn. the Kawartha Lakes region and Lake Ontario at Trenton. It is located along the Otonabee River and is the Peterborough Lift Lock National Historic Site. At 65 feet in height or 19.8 meters, it was the highest hydraulic lift lock in the world when it opened in 1904. In fact, the second-highest hydraulic lift lock is also located along the Trent-Severn Waterway, at Lock 36 in Kirkfield, Ontario. Construction on the Peterborough Lift Lock took place from 1896 through 1904, using mostly local labor to build the unique lock. The Peterborough Lift Lock was declared a national historic site in 1979.


During the late 19th Century, Superintending Engineer Richard Birdsall Rogers (R.B. Rogers) was looking at the 65-foot lift required for the Trent-Severn Waterway in Peterborough. One solution would have been to construct a series of flight locks, such as what was built along the modern Erie Canal in Waterford, New York. Rogers investigated canal locks in Europe and found that a hydraulic lift lock would be the answer. A traditional flight lock system would have taken around three hours to transit this height. However, a hydraulic lift takes 90 seconds to traverse from start to finish. Although in practice it takes more than 90 seconds, due to the 144 tons of water that is transferred as the chambers of the lock go up and down. Powered by gravity, this enables the lifts to operate in two counter-balanced, bathtub-like chambers that would have otherwise required several locks if a flight of locks was chosen instead.


Each chamber of the lock has a piston, and they are connected, so they operate as a counterbalance to each other. Think of it as a giant teeter-totter. The lockkeeper only needs to add a small amount of water to the upper water box and it will begin to descend, and push the other box upwards. When water is let into the upper chamber, a connecting valve is opened and the heavier chamber automatically descends, forcing up the lower chamber to start a new cycle. Going between the two chambers of water, and beneath the giant rams that hold each basin up, is a 12-inch (30-centimeter) crossover pipe with a valve that gets open and shut so water can transfer from one side to another. Designed to not use any electricity, the tower in the middle with the red roof and flag on top that now serves largely as decoration was the original lockmaster’s position when the crossover valve operated with a pulley system. 


The lock structures that raise and lower the chambers use a riveted pony truss design to bear the load of the water they contain, and the truss-like lift locks were built by Dominion Bridge Company. Concrete, and more specifically compressed Portland cement, also make up a fair amount of the Peterborough Lift Lock. The lift lock is noteworthy for the substantial use of concrete in its construction, over 20,000 cubic meters of concrete. When it was built, the lift lock was the largest unreinforced concrete structure in the world. It is also reported to be the largest and tallest structure to use a compressed form of Portland cement.


Additionally, the Peterborough Lift Lock was originally designed not to use electricity, but electricity was added to the operation of the lock during the 1970s after one of the gates gave way, as water and a boat flowed off the side. Only minor injuries were suffered, but the decision to upgrade the gates was made due to that event. The only electricity the entire operation of the lift lock uses today is to control the automatic gates, navigation lights, and signage. The lift lock itself still operates using water, gravity, and the crossover valve that throttles the water flow. 


The Peterborough Lift Lock has its own set of lore as well. For as beautiful of a structure as it is, the lift lock may also be haunted. It is said that one construction worker from when the lock was being built has spent his afterlife wandering the site of his last job. According to local legend, one worker was entombed in the lift lock as cement was poured into the middle of the structure's three pillars. It is also said that the gravesite of R.B. Rogers, the superintendent who designed the lift lock, is angled in such a way that differs from the rest in the local cemetery so that his tombstone faces his legacy. My own visit was not haunted, but I certainly learned a lot when I visited the Peterborough Lift Lock. It's also impressive to see the lift lock in person. There is a visitor's center near the lift lock, but it was closed during my visit. I enjoyed discovering the history and exploring what the lift lock has to offer, including a few nooks and crannies I didn't anticipate coming across.


Historical marker explaining how the Peterborough Lift Lock operates.

There is a tunnel under the lift lock for traffic to cross on Hunter Street East, along with a staircase that will take you to the top of the lock.

View of the Trent-Severn Waterway from the top of the Peterborough Lift Lock.

Upper chamber of the lift lock.

Looking towards the upper chamber of the lift lock. This would be for the right chamber.

The tunnel through the lift lock has an observation window where you can see the lower chamber of the lift lock and the canal below. The Trent-Severn Waterway is mostly a recreational canal at the time, as commercial traffic uses the larger Welland Canal between Lake Erie and Lake Ontario. There weren't any boats that were using the locks when I visited, but it was still neat to see. 

Underneath the hydraulic lift lock.

Historical plaque honoring the superintendent of the lift lock construction, R.B. Rogers. He was through and through a Peterborough man. At the time the lift lock was built, the Trent-Severn Waterway was known as the Trent Canal.

Hunter Street East tunnel through the lift lock.

View of the upper chamber from the lower part of the lift lock.

It is impressive to see the lift lock from ground level.

How to Get There:



Sources and Links:
Hiking the GTA - Peterborough Lift Lock
The Travels of Tug 44 - Peterborough Lift Lock - Ontario
Peterborough & The Kawarthas - Peterborough Lift Lock
Labels:
Location: &, Hunter Street East, 2320 Ashburnham Dr, Peterborough, ON K9J 6X9, Canada

Comments

Post a Comment

Popular posts from this blog

Old US Route 60/70 through Hell (Chuckwall Valley Road and Ragsdale Road)

By
Back in 2016 I explored some of the derelict roadways of the Sonoran Desert of Riverside County which were part of US Route 60/70; Chuckwalla Valley Road and Ragsdale Road. US 60 and US 70 were not part of the original run of US Routes in California.  According to USends.com US 60 was extended into California by 1932.  US 60 doesn't appear on the California State Highway Map until the 1934 edition. USends.com on US 60 endpoints 1934 State Highway Map Conversely US 70 was extended into California by 1934, it first appears on the 1936 State Highway Map. USends.com on US 70 endpoints 1936 State Highway Map When US 60 and US 70 were extended into California they both utilized what was Legislative Route Number 64 from the Arizona State Line west to Coachella Valley.  LRN 64 was part of the 1919 Third State Highway Bond Act routes.  The original definition of LRN 64 routed between Mecca in Blythe and wasn't extended to the Arizona State Line until 1931 acc...
3 comments
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

Paper Highways; Interstate H-4 through downtown Honolulu

By
The Hawaiian Island of O'ahu is home to four Interstate Highways; H-1, H-2, H-3 and H-201.  Had history gone slightly differently during the 1960s a fifth Interstate corridor on O'ahu could have been constructed through downtown Honolulu and the neighborhood of Waikiki.  The proposed corridor of Interstate H-4 can be seen above as it was presented by the Hawaii Department of Transportation during October 1968 .   This page is part of the Gribblenation O'ahu Highways page.  All Gribblenation and Roadwaywiz media related to the highway system of O'ahu can be found at the link below: https://www.gribblenation.org/p/gribblenation-oahu-highways-page.html The history of proposed Interstate H-4 The corridor of Interstate H-4 was conceived as largely following what is now Hawaii Route 92 on Nimitz Highway and Ala Moana Boulevard.   Prior to the Statehood the first signed highways within Hawaii Territory came into existence during World War II.    Dur...
Post a Comment
Read more